Graduate Student Theses Supervised
Ph.D. Theses
Wu, S., "Selection of Simplified Models and Parameter Estimation Using Limited Data", Ph.D. Thesis, Queen's University (2009).
Thompson, D.E., "Modeling of Molecular Weight Distribution in Zieger-Natta Catalyzed Ethylene Copolymerizations", Ph.D. Thesis, Queen's University (2009).
Varziri, M.S., "Parameter Estimation in Nonlinear Continuous-Time Dynamic Models with Modelling Errors and Process Disturbances", Ph.D. Thesis, Queen's University (2008).
Sun, L., "Numerical Studies of the Flow and Pressure Distribution in a PEM Fuel Cell Flow Plate adjacent to a Porous Gas Diffusion Layer", Ph.D. Thesis, Queen's Univeristy (2006).
Kou, B., "Mathematical Modelling of Gas-Phase Ethylene/Hexene Copolymerization with Metallocene Catalyst", Ph.D. Thesis, Queen's University (2004).
Schaffer, M. A., "Chemical Pathways and Kinetics of the Later Stages of Nylon Polymerization Processes", Ph.D. Thesis, Queen's University (2003).
Ma, J., "Living Nitroxide-Mediated Styrene Miniemulsion Polymerization", Ph.D. Thesis, Queen's University (2002).
Shaw, B.M., "Statistical Issues in Kinetic Modelling of Gas-Phase Ethylene Copolymerization", Ph.D. Thesis, Queen's University (1999).
Jiang, Y., "Non-Equilibrium Modeling of Multi-Component Condensation in a Vertical Heat Exchanger of a Polyethylene Reactor", Ph.D. Thesis, Queen’s University (1997).
Dadebo, S.A., "Dynamic Optimization and Nonlinear Control of Chemical Processes", Ph.D. Thesis, Queen’s University (1996).
M.Sc.(Eng.) Theses
Woloszyn, J. D., "Model Development and Parameter Estimation for Styrene Polymerization", M.Sc. Thesis, Queen's University (2012).
McLean, K. A. P., "Obtaining the Best Model Predictions and Parameter Estimates using Limited Data", M.Sc. Thesis, Queen's University (2011).
Snyder, S. L., "Modeling the Thermal Stability of in vitro Diagnostic Assays", M.Sc. Thesis, Queen's University (2010).
Chain, J. N. M., "Recipe Improvement and Mathematical Modeling of Polymer Gel Dosimeters", M.Sc. Thesis, Queen's University (2010).
Latham, D. A., "Mathematical Modelling of an Industrial Steam Methane Reformer", M.Sc. Thesis, Queen's University (2008).
Koeva, V. I., "Improved Recipes for Polymer Gel Dosimeters Containing N-Isopropylacrylamide", M.Sc. Thesis, Queen's University (2008).
Castagne, D., "Mathematical Modeling of PEM Fuel Cell Cathodes: Comparison of First-Order and Half-Order Reaction Kinetics", M.Sc. Thesis, Queen's University (2008).
Senden, R. J., "Polymer Gel Dosimeters With Reduced Toxicity and Enhanced Performance", M.Sc. Thesis, Queen's University (2006)
Wu, S., "Two-Step Estimation in Linear Regression", M.Sc. Thesis, Queen's University (2005)
Chan, S.W., "The Quest for True Rate Constants: Carbocationic Polymerization", M.Sc. Thesis, Queen's University (2005).
Poyton, A., "Parameter Estimation in Dynamic Models Using Principal Differential Analysis", M.Sc. Thesis, Queen's University (2005).
Zheng, W., "Experimental Study and Mathematical Modeling of Melt-Phase Nylon Polycondensation Reaction", M.Sc. Thesis, Queen's University (2004).
Fuxman, A. M., "Modelling Chemical and Physical Phenomena in Polyacrylamide Gel for Radiation Dosimetry", M.Sc. Thesis, Queen's University (2003).
Zhang, Q., "Dynamic Mathematical Modeling of a Polyacrylamide Gel Dosimeter", M.Sc. Thesis, Queen's University (2001).
Liu, Q., "Mathematical Modeling and Parameter Estimation in Living Isobutylene Polymerization", M.Sc. Thesis, Queen's University (2001).
Benda, M.A., "Nonlinearity and Controller Performance for Product Property Control in a Gas-Phase Polyethylene Reactor", M.Sc. Thesis, Queen's University (2000).
Xie, M., "Nitroxide-Mediated Living Radical Styrene Polymerization in Miniemulsion", M.Sc. Thesis, Queen's University (2000).
Sandink, C.A., "Screening Diagnostics for Parameter Selection in Extended Kalman Filter Implementations", M.Sc. Thesis, Queen's University (1999).
Haskins, G.D., "Reactor Modifications for Ethylene-Butene Gas-Phase Copolymerization", M.Sc. Thesis, Queen's University (1999).
Tremblay, A., "Parameter Estimation from Polymerization Reactor and Product Property Data: Missing Data Approach", M.Sc. Thesis, Queen’s University (1999).
Krywko, W.P., "Modelling Morphology and Molecular Weight Development in Emulsion Homopolymerization", M.Sc. Thesis, Queen’s University (1998).
Macdonald, D.A., "Mechanism and Mathematical Modeling of Polylactide Synthesis for Biomedical Applications", M.Sc. Thesis, Queen’s University (1998).
Williams, C.H., "Commissioning of an Ethylene-1-Butene Co-Polymerization Reactor", M.Sc.Thesis, Queen’s University (1996).
Toffolo, R.W., "The Modeling of Molecular Weight Distributions Using Laplace Transforms", M.Sc. Thesis, Queen’s University (1995).
|
